OS32C

Varnostni laserski skener

Zelo lahek in kompakten, z majhno porabo. Varnostni laserski skener OS32C ima široko uporabno vrednost. Primeren je za številne aplikacije. Zaradi enostavne uporabe, nastavitve in montaže se ga da hitro uporabiti drugje ali mu določiti drugačno območje varovanja in delovanja. Za lažji nadzor delovanja ima na ohišju pregleden LED prikazovalnik.

  • Varnostna kategorija 3
  • Možnost 70 prednastavljenih območij varovanja v kombinaciji z varnostnimi in opozorilnimi območji
  • Varnostno območje na razdalji do 3 m
  • Opozorilno območje na razdalji do 10 m
  • LED indikator na ohišju za nadzor območja v 8 segmentih
  • Določitev referenčne varnostne postavitve za primer neželenega premika skenerja
Oznaka izdelka: os32c Kategorije: , , ,

Opis

Podatki za naročilo

 

Description

Max. operating range

Order code

OS32C with back location cable entry

3 m

OS32C-BP

4 m

OS32C-BP-4M

OS32C with side location cable entry

3 m

OS32C-SP1

4 m

OS32C-SP1-4M

OS32C with back location cable entry

EtherNet/IP capable for status measurement data reporting

3 m

OS32C-BP-DM

4 m

OS32C-BP-DM-4M

OS32C with side location cable entry

EtherNet/IP capable for status measurement data reporting

3 m

OS32C-SP1-DM

4 m

OS32C-SP1-DM-4M

Description

Remarks

Order code

Configuration tool

CD-ROM

OS supported:

Windows 2000, XP, Vista, Windows 7

included

Specifications

Sensors

Sensor type

Type 3 safety laser scanner

Safety category

Category 3, performance level d (ISO13849-1: 2006)

Detection capability

Configurable; Non-transparent with a diameter of 30, 40, 50 or 70 mm (1.8% reflectivity or greater)

Monitoring zone

Monitoring zone set count: (Safety zone + 2 warning zones) × 70 sets

Operating range

Safety Zone: 4.0 m (min. obj. resolution of 70mm, only OS32C-_-4M types)
3.0 m (min. obj. resolution of 50 mm or 70 mm)
2.5 m (min. obj. resolution of 40 mm)
1.75 m (min. obj. resolution of 30 mm)

Warning Zone: 10.0 m (15.0 m for OS32C-_-4M types)

Detection angle

270°

Response time

Response time from ON to OFF: From 80 ms (2 scans) to 680 ms (up to 17 scans)

Response time from OFF to ON: Response time from ON to OFF + 100 ms to 60 s (configurable)

Line voltage

24 VDC +25%/-30% (ripple p-p 2.5 V max.)

Power consumption

Normal operation: 5 W max., 4 W typical (without output load)

Standby mode: 3.75 W (without output load)

Safety output (OSSD)

PNP transistor × 2, load current of 250mA max., residual voltage of 2 V max., load capacity of 2.2 µf max., leak current of 1 mA max.

,

,

Auxiliary output (Non-safety)

NPN/PNP transistor × 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max.

,

,

Warning output (Non-safety)

NPN/PNP transistor × 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max.

,

,

Output operation mode

Auto start, start interlock, start/restart interlock

Input

External Device Monitoring (EDM)

ON: 0 V short (input current of 50 mA), OFF: Open

Start

ON: 0 V short (input current of 20 mA), OFF: Open

Zone select

ON: 24 V short (input current of 5 mA), OFF: Open

Stand-by

ON: 24 V short (input current of 5 mA), OFF: Open

Connection type

Power cable: 18-pin mini-connector (pigtail)

Communication cable: M12, 4-pin connector

Connection with PC

Communication: EtherNet/IP

Indicators

RUN indicator: Green, STOP indicator: Red, Interlock indicator: Yellow, Warning output indicator: Orange,
Status/diagnostic display: 2 × 7-segment LEDs, Intrusion indicators: Red LED × 8

Enclosure rating

IP65 (IEC60529)

Dimensions (W × H × D)

133.0 × 104.5 × 142.7 mm (except cable)

Weight (Main Unit only)

1.3 kg

Approvals

Certified by: TÜV Rheinland, UL

Major standards: IEC61496-1/-3 (Type 3), IEC61508 (SIL2), ISO13849-1:2008 (Category 3, performance level d), UL508, UL1998

Accessories (sold separately)

Power cable

Appearance

Description

Remarks

Order code

Cable length: 3 m

One cable is required per sensor

OS32C-CBL-03M

Cable length: 10 m

OS32C-CBL-10M

Cable length: 20 m

OS32C-CBL-20M

Cable length: 30 m

OS32C-CBL-30M

Ethernet cable

Appearance

Description

Remarks

Order code

Cable length: 2 m

Required for configuration and monitoring

OS32C-ECBL-02M

Cable length: 5 m

OS32C-ECBL-05M

Cable length: 15 m

OS32C-ECBL-15M

Note: An ethernet cable with an M12, 4-pin connector is required.

Mounting brackets

Appearance

Description

Remarks

Order code

Bottom/side mounting bracket

Bottom/side mounting bracket × 1,
unit mounting screws × 4 sets

OS32C-BKT1

XY axis rotation mounting bracket

XY axis rotation mounting bracket × 1,
unit mounting screws × 6 sets,
bracket mounting screws × 1 set

(must be used with OS32C-BKT1)

OS32C-BKT2

Simple mounting bracket

Simple mounting brackets × 2,
unit mounting screws × 4 sets

OS32C-BKT3

Protective cover for window

OS32C-BKT4

Mounting stand

When using a mounting stand, use an OS32C
with side location cable entry (OS32C-SP1).

The OS32C with back location cable entry (OS32C-BP)
cannot be mounted.

Use with mounting brackets (OS32C-BKT1 and OS32C-BKT2).

OS32C-MT

Hardware kit for mounting stand

Mounting screws × 3 sets

Use this when mounting a bracket to the mounting stand.

OS32C-HDT

Miscellaneous

Appearance

Description

Remarks

Order code

Scan window

Spare for replacement

OS32C-WIN-KT

Sensor block without I/O block

Max. operating range: 3 m

Spare for replacement

OS32C-SN

Sensor block without I/O block

Max. operating range: 4 m

OS32C-SN-4M

Sensor block without I/O block for EtherNet/IP

Max. operating range: 3 m

Spare replacement for EtherNet/IP

OS32C-SN-DM

Sensor block without I/O block for EtherNet/IP

Max. operating range: 4 m

OS32C-SN-DM-4M

I/O block

With cable access
from the back

Spare for replacement

OS32C-CBBP

With cable access
from the left side

Spare for replacement

OS32C-CBSP1

Window cleaning kit, anti-static cleaner

Accessory

WIN-CLN-KT